SunkenLand Projects

Foundation	1st Floor	2nd Floor	Roof	Additions
Orientation Foundations Setting the Entry Support Columns Battering Wall Initial Floors	The Balcony Secure Sleep Planning Ahead Walls 2nd Floor Columns Barricade Planters	Living Area Access Stairway Outer Walls Inner Columns Inner Wall Doors	Roof Access Decking Wood Columns Stair enclosure Removals Completion	2nd Floor Deck Skirting Furnishings

All the building pieces seen in this guide are custom created digital models and can be downloaded from the 3D Resources page or at my Daz/Poser website.

Additions:
Wood Deck

Go to next step for the Defensive Skirting.

Scrap	254	+0
Wood	168	+0
Cloth	21	+0

Additions:
Defensive Skirting

Add 4 Metal Foundation pieces, starting with the center.

(upper floors not shown for clarity)

Scrap	254	+18
Wood	168	+0
Cloth	21	+0

Additions:
Back Skirting

Create 6 Solid Metal Walls on the outer edge.

If possible, the walls should be Reinforced Walls that cost 1 Iron Ingot each that you get by smelting.

Scrap	272	+15
Wood	168	+0
Cloth	21	+0

Additions:
Remove the Temp Foundations

Using the Repair Hammer, destroy the 4 Foundation pieces. You will only get half of the material cost back (sometimes less).

Scrap	287	-9
Wood	168	+0
Cloth	21	+0

Additions:
Front Foundations

Add 3 more Foundations to the front.

Skip the section indicated. This will be your egress point.

Scrap	278	+18
Wood	168	+0
Cloth	21	+0

Additions:
Front Skirting

Create five Metal Walls pieces as shown wrapping around the front.

Leave the indicated space empty.

Scrap	296	+9
Wood	168	+0
Cloth	21	+0

Additions:
Front Walls

Remove the temporary Foundations.

Scrap	305	-9
Wood	168	+0
Cloth	21	+0

Additions:
Repeat Process

Repeat the process for the skirting on the other side.

Scrap	296	+12
Wood	168	+0
Cloth	21	+0

Additions:
Skirting Complete

Final result as shown with an opening for entering and exiting your base.

Start Over

Return to Main Menu

Scrap	308	+0
Wood	168	+0
Cloth	21	+0

All the building pieces seen in this guide are custom created digital objects and can be downloaded from the 3D Resources page or at my Daz/Poser website.